Buy tension wire 3 mm in the Aquagart online shop
- World of ponds
- Weed fleece
- Forest fence and pasture fence
- Other items
- Special offers
Filter
Content: 125 Meter (€0.27* / 1 Meter)
Content: 250 Meter (€0.24* / 1 Meter)
Content: 375 Meter (€0.23* / 1 Meter)
Content: 500 Meter (€0.22* / 1 Meter)
Content: 625 Meter (€0.22* / 1 Meter)
Mit dem Aufruf des Videos erklären Sie sich einverstanden, dass Ihre Daten an YouTube übermittelt werden und das Sie die Datenschutzbestimmungen gelesen haben.
The features and possible uses of 3 mm tensioning wires
We offer you our 3 mm tension wires made of thick galvanised and high-strength steel wire. One ring has 125 metres of wire. You can also choose to place several rings in one order so that you receive up to 625 metres of tension wire.
Our tensioning wires with a diameter of 3 mm can be tensioned between two posts to increase the resistance of the fence. To do this, the wire is pulled taut using a wire tensioner. Without this tension, the fence would be much more unstable, especially with larger distances between the posts. In such cases, lateral loads can occur, which can lead to fractures as the loads act on the mounting points.
To optimise the load on the fence, it should be checked regularly to ensure that the tension is evenly distributed over the entire wire. A well-tensioned wire ensures a more durable fencing system and reduces the risk of material defects that could occur due to uneven loading. It is important to note that overstretching the wire should be avoided at all costs, otherwise its service life could be shortened. Excessive tensioning can lead to accelerated wear and cause the tensioning wire to break at 3 mm. It is also advisable to purchase both the 3 mm tension wire and the wire tensioner from the same manufacturer, ideally as a complete set. This ensures optimum harmonisation of the materials. Another advantage of a well-matched set is that it simplifies installation and ensures that all components are compatible with each other. This saves time and effort during installation and ensures a more stable fence.
Properly attach the 3 mm tension wire to the fence
When installing the 3 mm tensioning wire, make sure that you tension it from the bottom up. First attach the wire tensioners and pull our 3 mm tension wire tight, first in the lower third of the fence and then in the upper third. Make sure that it is only slightly tensioned at the respective points. Only when there is a certain amount of tension throughout the fence can you tighten the wire on all parts so that there is stable pressure on all sides of the fence.
One speciality is knotted mesh and wire mesh fences. For these, it is necessary to weave the tensioning wire 3 mm with the structure. Determine the appropriate height for the wire tensioner on the fence post, after which the knotted mesh can be laid. Our high-quality Z-profile fence posts make tensioning the 3 mm tensioning wire particularly easy. It can also be retightened afterwards without any worries. By regularly re-tensioning the wire, you ensure that your fence remains stable and reliably fulfils its purpose even after years of use.
In contrast to knotted mesh and wire mesh fences, with electric fences it is possible to tension 3 mm tension wire immediately. The wire tensioner can be earthed separately. It is important that the wire used is insulated and that there is no contact between the wire tensioner and the live elements. In fences with fixed elements, the 3 mm tension wire also acts as an aid for the structure. It is not necessary to weave the wire into the fence
.Buy tension wire 3 mm and other garden supplies online at Aquagart
Use our tensioning wire with a wire thickness of 3 mm to reliably tension your fences! We also offer tension wires with a thickness of 2.5 mm. If you have any questions about our products or the ordering and shipping process, please feel free to contact us via our contact form, we are here for you.
Your team from Aquagart