Buy tension wire 2.5 mm at Aquagart
- World of ponds
- Weed fleece
- Forest fence and pasture fence
- Other items
- Special offers
Filter
Content: 250 Meter (€0.20* / 1 Meter)
Content: 500 Meter (€0.17* / 1 Meter)
Content: 750 Meter (€0.17* / 1 Meter)
Content: 1000 Meter (€0.16* / 1 Meter)
Content: 1250 Meter (€0.17* / 1 Meter)
Properties and use of tension wire 2.5 mm
Our tension wires 2.5 mm are made of thick galvanised, high-strength steel wire. One ring comprises a roll length of 250 metres. Accordingly, we offer a range of sizes from one to five rings (1250 m) in our online shop.
Tensioning wire 2.5 mm can be stretched between two posts to make the fence more resistant. To do this, the wire is tensioned with a wire tensioner. Without tension, the fence would be much more unstable, which is particularly noticeable with large post spacings. In this case, lateral loads in particular occur, which can cause fractures as the loads affect the mounting points. Our tensioning wires therefore contribute to a significantly longer service life of the fence, as the wire does not overstretch so quickly.However, please note that, according to the motto "after tight comes loose", you should avoid overstretching the wire at all costs. This leads to faster wear and accordingly it can happen that the tensioning wire breaks 2.5 mm. It is also recommended that the 2.5 mm tensioning wire and the wire tensioner are from the same manufacturer, i.e. purchased in a complete set to ensure optimum coordination of the materials. A correctly tensioned wire not only increases the service life of the fence, but also minimises the risk of damage caused by strong winds or external loads. Make sure that the tensioning force is evenly distributed to avoid localised overloading, which can damage the wire in the long term.
How to use 2.5 mm tension wire for different types of fencing
The 2.5 mm tension wire is attached in different ways for different types of fencing. In general, you have to stretch it from the bottom up. After attaching the wire tensioners, first pull the wire tight in the lower third of the fence and then in the upper third. The 2.5 mm tension wire should initially only be slightly tensioned until tension is applied to all parts of the fence. By tightening all the wires, stable pressure can then be built up on all sides. In this way, the forces are optimally distributed.
For knotted mesh and wire mesh fences in particular, you must weave the tension wire 2.5 mm with the structure. Before you weave the wire, first determine the appropriate height for the wire tensioner on the post and then lay the knotted mesh. With high-quality profile posts, tensioning the 2.5 mm tensioning wire is also particularly easy and the wire can be easily retightened at any time. The use of 2.5 mm tensioning wire guarantees a stable fence construction even in extreme weather conditions.
For electric fences, on the other hand, you can tension the 2.5 mm tensioning wire in the same way and earth the wire tensioner separately. In this case, the wire should also be insulated and the wire tensioner must not come into contact with the live elements. For fences with solid elements, the 2.5 mm tension wire also serves as a construction aid. It is not necessary to weave the wire into the fence
.Order 2.5 mm tension wire online from Aquagart now
For effective and correct installation of your fences, you should opt for the durable, robust and high-quality tensioning wire in 2.5 mm wire thickness from Aquagart. Our tension wires with a wire thickness of 3 mm also provide increased stability. Our tension wires not only offer exceptional durability, but are also easy to handle, making it much easier to erect your fences. Do you have any questions about our range? Then please contact us, we are here for you! With the right tensioning wire, you can ensure that your fence retains its function and stability for years to come without the need for frequent maintenance.
Your team from Aquagart