Vlies zur Trittschalldämmung kaufen

Produkt Filter

Impact sound insulation with vapour barrier, 25 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 25 Quadratmeter (€2.80* / 1 Quadratmeter)

€69.90*

Impact sound insulation with vapour barrier, 50 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 50 Meter (€2.76* / 1 Meter)

€137.80*

Impact sound insulation with vapour barrier, 75 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 75 Quadratmeter (€2.72* / 1 Quadratmeter)

€204.00*

Impact sound insulation with vapour barrier, 100 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 100 Quadratmeter (€2.70* / 1 Quadratmeter)

€270.00*

Impact sound insulation with vapour barrier, 125 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 125 Quadratmeter (€2.68* / 1 Quadratmeter)

€335.00*

Impact sound insulation with vapour barrier, 150 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 150 Quadratmeter (€2.66* / 1 Quadratmeter)

€399.00*

Impact sound insulation with vapour barrier, 175 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 175 Quadratmeter (€2.63* / 1 Quadratmeter)

€460.00*

Impact sound insulation with vapour barrier, 200 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 200 Quadratmeter (€2.60* / 1 Quadratmeter)

€520.00*

Impact sound insulation with vapour barrier, 225 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 225 Quadratmeter (€2.58* / 1 Quadratmeter)

€580.00*

Impact sound insulation with vapour barrier, 250 m² wide, 1 m – Underlay for parquet and laminate flooring, 1.5 mm – PES fleece, 150 g/m², with 70 µm PE film

Impact Sound Insulation with Vapour Barrier for Parquet and Laminate 2-in-1 flooring underlay made from 150 g/m² PES spunbond with laminated 70 µm PE film – only approx. 1.5 mm thick – for laminate, parquet and underfloor heating Key product benefits LOW BUILD-UP HEIGHT: The high-quality PES underlay provides effective impact sound insulation at a thickness of only approx. 1.5 mm – ideal for renovations and refurbishing older buildings. IMPACT SOUND INSULATION: Impact sound reduction of up to approx. 18 dB or 26%, helping to improve room acoustics and walking comfort. MOISTURE PROTECTION: The laminated silver-grey PE film helps protect the floor covering against rising moisture from the subfloor. EASY TO INSTALL: The dimensionally stable underlay is easy to roll out and cut and, when installed correctly, does not form disruptive creases or waves. VERSATILE: Suitable for floating laminate and parquet floors as well as use with underfloor heating. 2-IN-1 SOLUTION: Impact sound insulation and vapour control layer in one product – the pre-laminated film eliminates an additional installation step. REVERSIBLE: If the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. Product description This 2-in-1 parquet and laminate flooring underlay combines impact sound insulation and a vapour control layer in one product. It consists of high-quality white 150 g/m² PES spunbond fabric laminated with a silver-grey 70 µm PE film. It is suitable for floating laminate and parquet floors and for use with underfloor heating. At only approx. 1.5 mm thick, the underlay offers very good impact sound properties with an impact sound reduction of up to approx. 18 dB or 26%. It reduces footfall and impact noise, helping to improve room acoustics and walking comfort. The material also compensates for minor irregularities in the subfloor and provides a more even support surface for the floor covering. The high-quality material provides effective impact sound insulation despite its low thickness. Its minimal build-up height is particularly beneficial for renovations and older-building refurbishments where only limited space is available for an additional floor layer. This makes it easier to accommodate transitions, door clearances and existing connections. The laminated PE film protects the floor covering against rising moisture from the subfloor. A 10 cm film overlap allows adjoining strips to overlap securely. For continuous moisture protection, the overlaps can be sealed with our compatible adhesive tape. As the film is already laminated to the underlay, there is no need to lay a separate film sheet. This saves installation time and makes the work easier. The underlay can be used either way up: if the underside of the parquet is rough, the film side can face upwards without affecting the performance of the vapour control layer. The underlay is made from reprocessed mixed fibres, contains no harmful substances, does not rot and is resistant to moisture. The mould- and fungus-resistant material is dimensionally stable and durable. It is easy to roll out, cut and install, adapts well to the subfloor and, when installed correctly, does not form disruptive creases or waves. Each roll is 1 m wide and 25 m long, covering a total area of 25 m². Benefits at a glance Very low build-up height of approx. 1.5 mm Ideal for renovations and older-building refurbishments Reduces footfall and impact noise Improves room acoustics and walking comfort Compensates for minor subfloor irregularities PE film protects against rising moisture from the subfloor Impact sound insulation and vapour control layer in one product Pre-laminated film saves installation time Can be used either way up Made from reprocessed mixed fibres Contains no harmful substances Does not rot and is resistant to moisture Mould- and fungus-resistant material 10 cm film overlap for secure joining of adjoining strips Can be sealed with compatible adhesive tape Dimensionally stable, durable and long-lasting Quick, easy and crease-free installation Suitable for laminate, parquet and underfloor heating Technical data Material: white PES / polyester spunbond fabric Fibre composition: reprocessed mixed fibres Basis weight: 150 g/m² Material thickness: approx. 1.5 mm Compressive strength: 20 kPa Impact sound reduction: up to approx. 18 dB or 26% Thermal resistance (R-value): approx. 0.04 m²K/W Lamination: silver-grey 70 µm PE film Side film overlap: 10 cm Roll size: 1 x 25 m Coverage per roll: 25 m² Maximum tensile force, longitudinal: 480 N/5 cm Maximum tensile force, transverse: 320 N/5 cm Elongation at maximum tensile force, longitudinal: over 50% Elongation at maximum tensile force, transverse: over 60%

Content: 250 Quadratmeter (€2.58* / 1 Quadratmeter)

€645.00*

Geh- und Trittschall unter Laminat und Parkett reduzieren

Jeder Schritt versetzt einen schwimmend verlegten Boden in Schwingung. Mit einer Trittschalldämmung aus Vlies dämpfen Sie diese Bewegungen und reduzieren den entstehenden Geh- und Trittschall. Mit einer Trittschallminderung von bis zu ca. 18 dB beziehungsweise 26 % verbessern Sie die Raumakustik und sorgen für ein angenehmeres Laufgefühl auf Laminat und Parkett.

Das Dämmvlies mit einem Flächengewicht von 150 g/m² misst nur etwa 1,5 mm in der Höhe. Diese geringe Aufbauhöhe verschafft Ihnen gerade bei Renovierungen Spielraum, wenn Türen, Übergänge und bestehende Anschlusshöhen enge Grenzen setzen. Zudem gleichen Sie mit dem Vlies kleinere Unebenheiten im Untergrund aus. Während der Arbeiten können Sie bereits verlegte Böden oder angrenzende Laufwege zusätzlich mit selbstklebendem Abdeckvlies vor Schmutz schützen. So verbinden Sie mit dem Vlies zur Trittschalldämmung einen schlanken Bodenaufbau mit spürbarer Schalldämmung.

Trittschalldämmung mit Dampfsperre in einer Lage verlegen

Unter Laminat und Parkett spielt nicht nur die Schalldämmung eine Rolle, denn auch Feuchtigkeit aus dem Untergrund kann den Bodenbelag belasten. Durch die aufkaschierte, 70 µm starke PE-Folie verbinden Sie Trittschalldämmung und Feuchtigkeitsschutz in einer Lage und sparen sich eine separate Folienlage.

Der seitliche Folienüberstand von etwa 10 cm erleichtert Ihnen das Verbinden der einzelnen Bahnen. Verkleben Sie die Überstände mit geeignetem Klebeband und stellen Sie so einen durchgehenden Feuchtigkeitsschutz her. Rollen Sie die Trittschalldämmung aus und schneiden Sie sie auf das benötigte Maß zu. Je nach Bodenaufbau können Sie das Vlies zur Trittschalldämmung beidseitig verlegen. Bei Parkett mit rauer Unterseite zeigt die Folienseite beispielsweise nach oben.

Vlies zur Trittschalldämmung auch bei Fußbodenheizung einsetzen

Planen Sie Laminat oder Parkett über einer Fußbodenheizung, kommt es auf einen niedrigen Wärmedurchlasswiderstand der Unterlage an. Dank des niedrigen Wärmedurchlasswiderstands von ca. 0,04 m²K/W können Sie das Dämmvlies auch bei Bodenaufbauten mit Fußbodenheizung einsetzen.

Mit einer Druckfestigkeit von 20 kPa bleibt das Vlies unter dem Bodenbelag belastbar und formstabil. Gleichzeitig setzen Sie auf ein feuchtigkeitsunempfindliches, schimmel- und pilzresistentes Material, das nicht verrottet. So verwenden Sie das Vlies zur Trittschalldämmung dauerhaft unter schwimmend verlegtem Laminat oder Parkett. Für andere Bodenaufbauten finden Sie bei Aquagart außerdem Vliese zur Trittschalldämmung aus Kokosfaser in verschiedenen Längen.

Vlies zur Trittschalldämmung bei Aquagart passend zur Fläche auswählen & bestellen

Bei Aquagart erhalten Sie die Trittschalldämmung aus Vlies mit 1 m Breite in verschiedenen festen Flächengrößen von 25 bis 250 m². So stimmen Sie die benötigte Menge genau auf die tatsächlich zu verlegende Bodenfläche ab. Rechnen Sie zusätzlich Material für Zuschnitte, Randbereiche und die Überlappung der Folien ein.

Ob Sie einen einzelnen Raum oder mehrere Räume mit Vlies zur Trittschalldämmung ausstatten: Mit der Kombination aus Dämmvlies, Schalldämmung und integrierter Dampfsperre erhalten Sie eine praktische Unterlage für Laminat und Parkett. Möchten Sie während der Renovierung Möbel, Baumaterialien oder größere Bereiche separat schützen, stehen Ihnen im Sortiment von Aquagart außerdem Abdeckplanen zur Auswahl.

Offen bleibt damit nur, wie viel Fläche Sie mit der Trittschalldämmung ausstatten möchten. Bei Fragen zu Maßen oder zur Verlegung hilft Ihnen das Team von Aquagart gerne weiter. Wählen Sie jetzt die passende Flächengröße und bestellen Sie Ihr Vlies zur Trittschalldämmung bei Aquagart.