Kokosfasermatte zur Trittschalldämmung

Produkt Filter

5 m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 5 Meter (€6.50* / 1 Meter)

€32.50*

10m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 10 Meter (€6.30* / 1 Meter)

€63.00*

15m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 15 Meter (€6.10* / 1 Meter)

€91.50*

20m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 20 Meter (€5.80* / 1 Meter)

€116.00*

25m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 25 Meter (€5.50* / 1 Meter)

€137.50*

30m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 30 Meter (€5.30* / 1 Meter)

€159.00*

35m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 35 Meter (€5.10* / 1 Meter)

€178.50*

40m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 40 Meter (€4.90* / 1 Meter)

€196.00*

45m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 45 Meter (€4.85* / 1 Meter)

€218.25*

50m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 50 Meter (€4.80* / 1 Meter)

€240.00*

60m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 60 Meter (€4.75* / 1 Meter)

€285.00*

70m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 70 Meter (€4.70* / 1 Meter)

€329.00*

80m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 80 Meter (€4.60* / 1 Meter)

€368.00*

90m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 90 Meter (€4.65* / 1 Meter)

€418.50*

100m Coconut Fibre Impact Sound Insulation 600 g/m² – Natural Fibre Mat, 3.5 mm Thick, 1 m Wide – Thermal and Acoustic Insulation

AQUAGART Coconut Fibre Impact Sound Insulation 600 g/m² Robust natural fibre mat for thermal and impact sound insulation as well as acoustic decoupling in wooden floors – 1 m wide and approximately 3.5 mm thick. Natural insulation with a low installation height AQUAGART coconut fibre impact sound insulation is a durable insulating underlay made from resistant natural fibres. It is suitable for thermal and impact sound insulation beneath wet screeds, dry screeds and mastic asphalt, as well as for acoustic decoupling in wooden floors. With a material thickness of only approximately 3.5 mm, the coconut fibre mat enables a particularly low floor construction. Despite its low thickness, the material is highly load-resistant, tear-resistant and dimensionally stable. This makes it especially suitable for renovations and other applications where limited installation height is available. Product benefits LOW INSTALLATION HEIGHT: Approximately 3.5 mm thick and ideal for renovations and low-profile floor constructions. IMPACT SOUND INSULATION: Helps reduce footfall, impact and structure-borne noise. FOR WOODEN FLOORS: Suitable for acoustic decoupling in wooden floors and other compatible floor constructions. PERMANENTLY ELASTIC: The natural fibres remain elastic after installation and retain their dynamic stiffness. HIGH LOAD-BEARING CAPACITY: The robust fibre mat is also suitable for demanding floor constructions. GOOD THERMAL INSULATION: Adds a natural insulating layer to the floor construction. RESISTANT TO ROTTING: Coconut fibres are naturally robust, tear-resistant and durable. VERSATILE COMBINATION: Can be combined with all insulating materials that provide sufficient compressive strength. WITHOUT SUPPORT FIBRES: The coconut fibre mat is manufactured without synthetic support fibres. Areas of application thermal and impact sound insulation beneath wet screeds insulation beneath dry screeds suitable floor constructions beneath mastic asphalt impact sound insulation and acoustic decoupling in wooden floors use as an elastic perimeter insulation strip combination with pressure-resistant insulating materials Permanently elastic natural fibres Coconut fibres are characterised by their high natural elasticity, tear resistance and durability. The fibres remain permanently elastic after installation. This helps preserve the dynamic stiffness and acoustic decoupling properties of the insulating mat. Coconut fibres are obtained from the protective outer husk of the coconut. In their natural environment, this fibrous layer protects the fruit from intense sunlight and damage. These characteristics make coconut fibres particularly robust, elastic and resistant to rotting. After extraction, the fibres are carefully processed, washed and dried. The coconut fibres are supplemented with sisal and/or jute fibres. The mat is bonded with latex applied to both sides. Material and construction Basis weight: approximately 600 g/m² Material width: 1 m Material thickness: approximately 3.5 mm Fire classification: B2 Composition: approximately 90% coconut fibres Additional natural fibres: approximately 10% sisal and/or jute fibres Binder: latex Latex application: approximately 60 g/m², tolerance ±10% Construction: latex applied to both sides Support fibres: no synthetic support fibres Weight tolerance: ±18% Thickness tolerance: ±15% Information about natural fibres Natural fibres may show material-specific variations in colour, structure, weight and thickness. A completely uniform material thickness across the entire surface cannot be guaranteed for technical reasons. Suitability for the intended floor construction must be checked before installation.

Content: 100 Meter (€4.60* / 1 Meter)

€460.00*

Dauerelastische Kokosfaser für die Schallentkopplung im Bodenaufbau

Für eine wirksame Trittschalldämmung ist entscheidend, dass die Dämmlage ihre Elastizität auch unter Belastung behält. Die verwendete Kokosfaser bleibt auch nach dem Verlegen elastisch und unterstützt dadurch die Schallentkopplung zwischen den Schichten des Bodenaufbaus. So reduzieren Sie die Weitergabe von Schwingungen, die sonst als Geh-, Tritt- oder Körperschall hörbar werden.

Die Dämmmatte besteht zu ca. 90 % aus Kokosfaser und zu rund 10 % aus Sisal- und/oder Jutefasern. Synthetische Stützfasern kommen dabei nicht zum Einsatz, stattdessen sind die Fasern auf beiden Seiten mit Latex gebunden. Diese Verarbeitung stabilisiert die Dämmmatte und erhält zugleich die Elastizität, die für die Trittschalldämmung wichtig ist. Die eingesetzte Kokosfaser ist zudem robust, elastisch und schwer verrottbar.

Kokosfasermatte auch für Randbereiche und kombinierte Dämmungen einsetzen

Neben der flächigen Trittschalldämmung können Sie die Matte aus Kokosfaser auch als elastischen Randdämmstreifen einsetzen. Damit trennen Sie den Bodenaufbau an angrenzenden Bauteilen und unterstützen die Schallentkopplung auch im Randbereich. Die Matte lässt sich dafür problemlos passend zuschneiden und mit ausreichend druckbelastbaren Dämmstoffen kombinieren.

Benötigen Sie für schwimmend verlegtes Laminat oder Parkett eine dünnere Unterlage mit integrierter PE-Folie, finden Sie bei Aquagart alternativ Vliese zur Trittschalldämmung.

Geringe Aufbauhöhe mit belastbarer Naturfasermatte verbinden

Mit ca. 3,5 mm Materialstärke bleibt die Dämmmatte aus Kokosfaser im Bodenaufbau flach. Das zahlt sich vor allem bei Sanierungen aus, wenn vorhandene Türhöhen, Übergänge oder Anschlüsse wenig zusätzlichen Spielraum lassen. Gleichzeitig erhalten Sie mit einem Flächengewicht von ca. 600 g/m² eine robuste und konturstabile Dämmmatte für die Trittschalldämmung.

Schneiden Sie die 1 m breite Dämmmatte aus Kokosfaser passend zur benötigten Fläche zu. Für Ihre Dämm- und Verlegearbeiten finden Sie bei Aquagart passend dazu auch Klebeband für Trittschalldämmung.

Kokosfaser zur Trittschalldämmung bei Aquagart bestellen

Für Estrichflächen, Holzböden oder Randbereiche wählen Sie im Online-Shop die Ausführung, die zu Ihrem geplanten Einsatz passt. Die 1 m breite Kokosfasermatte ist in verschiedenen Varianten zwischen 5 und 100 m erhältlich, sodass Sie die Ausführung passend zur benötigten Dämmfläche auswählen können.

Auch der Schutz rund um die eigentlichen Bodenarbeiten lässt sich direkt mitplanen: Abdeckplanen halten angrenzende Bodenflächen, Möbel oder gelagerte Materialien während der Arbeiten frei von Staub und Schmutz. Falls Sie noch Fragen zu Abmessungen oder Produktvarianten haben, ist das Team von Aquagart gerne für Sie da. Ihre passende Kokosfasermatte zur Trittschalldämmung können Sie direkt im Online-Shop auswählen und bestellen.